Silicon Steel Sheet Slitting Line,silicon Steel Sheet Slitting Machine



Silicon Steel Sheet Slitting Line,silicon Steel Sheet Slitting Machine   
  • Product name:Silicon Steel Sheet Slitting Line,silicon Steel Sheet Slitting Machine
  • Scope of application:Silicon steel coil,silicon steel sheet,transformer core,transformer lamination
  • Remark:
  • Product category:silicon steel slitting line
  • Watch Product Videos
  • PDF Download



Product description

BGL-1250  silicon steel sheet slitting line,silicon steel sheet slitting machine
   Silicon  steel  sheetion  of  vertical  shear (ie  the  rolling  sheear  line)is  the  production  of  transformers, transformers, electrical  appliances  and  sheet  metal  products such  as paper  materials  will  be  cut  into  different  width  strips, not  the  lack  of  special  equipment.  BHJ series  inverter  control sliting  line  is developed  by  our  factory  replacement  product, from  automatic  tensioner,  frequency  ciil  machine,  open-book lift  the material  vehicles, frequency  roll  shear,  led  is  pressed,  inverter  winding  machine, winding  down  discharging vehicles,  electrical  appliances such  as  single  frequency  conversion  control  cabinet  composed  of  a  continuous  cut  into  strips , rolled  by  the  winding  machine  coil.
      The  contiuuous  roll  cut  slitting  line  coil  ,frequency  control,  production  efficiency,  rolling  shear  line  speed  10-70 m/min ,using  Danfoss  VLT®Micro  Drive  FC51  inverter  speed  stransmission,  speed  steady, uniform speed  can  automatically  track  the  opearation  speed  can  also  be  stand-alone  operation,  the  device  smart  digital  meter   length,
Cut-cut,  saving  labor.  Simple  structure.. adjusemt.  Operation,  and  maintenance.

1.Construction and characteristics of the production line
1   Decoiler including the feeding vehicle (hydraulic pressing, electric moving of the material vehicle, Electric lift)
2  material supporting device
3  adjustable guide device
4 roll slitting machine
5 supporting intermediate bridge
6 pressing guide device
7   Recoilder(hydraulic pressing)
8   Hydraulic station
9   Control cabinet and operation desk
10、Carbide cutting tools :12 pcs
2.Technical characteristics of the production line
1.requirement of the decoiler
(1) inside diameter:f500mm
(2)width:500-1250mm
(3)max weight:6T
(4)max outside diameter:φ1200mm
(5)thickness of the silicon steel sheet:0.21-0.5mm
2.Coils specification
(1)max inside diameter of recoils:f510mm
(2)min width of cutting sheet:40mm
3.technical specification and main parameter
(1) spindle diameter:Φ125mm,
     HRC53-59,Rockwell hardness of the spindle surface
     axial termination runout≤0.003mm,
     radial runout≤0.02mm,
      end runout after installing the roll scissors≤0.012mm;
(2)cutting speed:0-120m/min
(3)Recoiler end nonstraightness below 1.0mm (continuous uniform cutting speed, 10 circles inner layer not considered
(4)Maximum number of knives
(5)Recoil pressure:500kg(adjustable air bag)
(6)Cutting burr≤0.02mm;
(7) Single edge non-straightness≤0.2mm/2000mm;
(8)tolerance of cutting width:±0.1mm;
(9)Diameter of knife tool:Φ250mm,
4.  Working voltage: voltage fluctuation 380V±10%,Frequency 50HZ±2%
5. Environmental conditions: not more than 45°C for the temperature and not higher than 85% for the humidity.
6.  Equipment operation direction: Left

   Professional production    Professional production Silicon Steel Slitting Line,At the same time we perform excellent port service, cost-effective, rapid and timely delivery.,At the same time we perform excellent port service, cost-effective, rapid and timely delivery.

    Professional production Silicon Steel Sheet Slitting Line,silicon Steel Sheet Slitting Machine,At the same time we perform excellent port service, cost-effective, rapid and timely delivery.

 
                                                                                        Online Message
Name
Telephone
Email
Corporate name
Company address
Message